Προϊόντα από την ίδια κατηγορία
-
Arduino OEM
Arduino STEP MOTOR DRIVER
0 out of 5(0)1) PCB board size: 23*17*9mm;
2) patch process, LED status display;
3) compact size, sophisticated technology;
4) instructions: use ULN2003 high power Darlington chip to drive stepper motor driver; B, C, A, D LEDs indicate the state of the working four-phase stepper motor; set with the standard interface of stepping motor which can be directly inserted in the use; with diameter 3mm screw hole to make assembly fixing convenient.
Interface Description:VCC and GND power input is range from 5 to 24V ;IN1-IN4 corresponding test program 51
microcontroller P0.0-P0.3Κωδικός: ME017 -
Arduino OEM
R3 Basic Starter Kit για Arduino
0 out of 5(0)Αυτό το κιτ εκμάθησης είναι κατάλληλο για ξεκίνημα. Περιλαμβάνει πολλά έργα με αναλυτικές οδηγίες, ξεκινώντας από τα βασικά μέχρι πιο σύνθετα project. Διαφορετικό από άλλα κιτ, προσθέτει ορισμένες λειτουργικές μονάδες, όπως RFID, μονάδα θερμοκρασίας και υγρασίας κ.λπ. Υπάρχει διάγραμμα σύνδεσης και κώδικας για κάθε project, είναι εύκολο να το μάθετε.
- Πλακέτα R3 με καλώδιο USB: 1 τμχ
- Breadboard με 830 τρύπες: 1 τμχ
- Μπαταριοθήκη AA 6 θέσεων: 1 τμχ
- Αντιστάσεις 220 Ohms /1K /10K: 10 τμχ
- Διακόπτης κλειδιού: 4 τμχ
- Αισθητήρας φλόγας/μονάδα RGB (1PC/κάθε): 2 τμχ
- Παθητικός βομβητής/δέκτης υπερύθρων (1 τεμ/κάθε): 2 τμχ
- Ρυθμιζόμενη αντίσταση /8 * 8 dot matrix (1 τεμ/κάθε): 2 τμχ
- 74H595 /Μίνι τηλεχειριστήριο (1 τεμ/κάθε): 2 τμχ
- Μπαταριοθήκη AAA 6 θέσεων/Breadboard με 830 τρύπες (1 τμχ/κάθε): 2 τμχ
- Φωτοαντίσταση: 3 τμχ
- Αισθητήρας θερμοκρασίας LM35: 1 τμχ
Κωδικός: ARD1013 -
Arduino OEM
5 Line 4 Phase Stepper Motor Drive Module
0 out of 5(0)1. With the ULN2003A motor driving chip
2. all pins of the chip have been led out to make connection easy
3. with pins of 5-12V power supply
4. with 4 signal indicator
5. with XH-5P socket directly connected with the 28BYJ-48 model stepper motor
6. PCB board size: 40.5 (mm) x21.3 (mm)Κωδικός: ME015 -
Arduino OEM
USBtinyISP Programmer
0 out of 5(0)This USBTinyISP programmer is ideally suited for in circuit programming of AVR devices or for reflashing bootloaders onto Arduino based products.
It includes a 6 and 10 pin SPI interface and cables. The 6 pin interface is designed to connect directly to the 6 pin ICSP found on Arduino boards such as the Mega, Nano, etc. This board also works great with the Arduino development environment, AVR studio, and avrdude.Κωδικός: ME060