- Τάση λειτουργίας από 3,3 V έως 5 V
- Μορφή εξόδου: Έξοδος ψηφιακής μεταγωγής (0 και 1)
- Εξοπλισμένο με σταθερή οπή μπουλονιού, βολική εγκατάσταση
- Μικρού μεγέθους τυπωμένη κάρτα CIRCUIT: 3,2 cm x 1,4 cm
Ψηφιακος αισθητηρας δονήσεων LM393 για Arduino
Διαθέσιμο
Βάρος | 0.004 kg |
---|
Προϊόντα από την ίδια κατηγορία
-
Arduino OEM
USBtinyISP Programmer
0 out of 5(0)This USBTinyISP programmer is ideally suited for in circuit programming of AVR devices or for reflashing bootloaders onto Arduino based products.
It includes a 6 and 10 pin SPI interface and cables. The 6 pin interface is designed to connect directly to the 6 pin ICSP found on Arduino boards such as the Mega, Nano, etc. This board also works great with the Arduino development environment, AVR studio, and avrdude.Κωδικός: ME060 -
Arduino OEM
5 Line 4 Phase Stepper Motor Drive Module
0 out of 5(0)1. With the ULN2003A motor driving chip
2. all pins of the chip have been led out to make connection easy
3. with pins of 5-12V power supply
4. with 4 signal indicator
5. with XH-5P socket directly connected with the 28BYJ-48 model stepper motor
6. PCB board size: 40.5 (mm) x21.3 (mm)Κωδικός: ME015 -
Arduino OEM
Arduino STEP MOTOR DRIVER
0 out of 5(0)1) PCB board size: 23*17*9mm;
2) patch process, LED status display;
3) compact size, sophisticated technology;
4) instructions: use ULN2003 high power Darlington chip to drive stepper motor driver; B, C, A, D LEDs indicate the state of the working four-phase stepper motor; set with the standard interface of stepping motor which can be directly inserted in the use; with diameter 3mm screw hole to make assembly fixing convenient.
Interface Description:VCC and GND power input is range from 5 to 24V ;IN1-IN4 corresponding test program 51
microcontroller P0.0-P0.3Κωδικός: ME017 -
Arduino OEM
CH340G R3 Start Kit RFID Κιτ Εκμάθησης για Arduino
0 out of 5(0)- CH340G R3 Board With USB Cable 1τμχ
- Breadboard 830 Point Solderless PCB Bread Board MB-102 1τμχ
- RC522 RFID Module with IC Card S50 Fudan Cards Key Chains 1τμχ
- 5V 4-Phase 5-Wire Micro Mini Reduction Stepper Motor 1τμχ
- Stepper Motor Drive Board (UL2003) Test Board Motor Control Module 1τμχ
- LCD 1602 I2C module(Blue light) 1τμχ
- 5V 1 Channel Relay Module Shield 1τμχ
- DS1302 clock module 1τμχ
- 20cm 10Pin Male TO Female Solderless Jumper Breadboard Wires 3τμχ
- SG90 180 Degrees 1τμχ
- LED Blue/Yellow/Red(5pcs/each) 15τμχ
- Resistor 220(8pcs/each) /1K/10K (5pcs/each) 18τμχ
- 5V Active Buzzer 1τμχ
- Passive buzzer 1τμχ
- 4 feet of vertical touch switch micro switch button switch 12*12*7.3 5τμχ
- Square head 4 feet of vertical touch switch micro switch button switch 12 * 12 * 7.3mm 5τμχ
- LM35 sensor module 1τμχ
- 5516 photoresistor 3τμχ
- Flame Sensor 1τμχ
- RGB 3 Color Full Color LED sensor 1τμχ
- PS2 Game Joystick Axis Sensor Module 1τμχ
- Sensitivity Sound Detection Sensor Module Voice Sensor 1τμχ
- DHT11 Temperature and humidity sensor Module 1τμχ
- Water Level Sensor Depth of Detection 1τμχ
- 4*4 Matrix Keypad Keyboard Module 16 Botton MCU 1τμχ
- 9V battery snap 1τμχ
- IR Infrared Receiver TL1838 VS1838B 38Khz 1τμχ
- 10K Single Union Potentiometer 1τμχ
- 1pc A digital control , 1pc 4Digital tube 2τμχ
- Dot-Matrix 8*8 LED Light Display 3.7mm Red 1τμχ
- 74HC595N chips 1τμχ
- IR mini remote control 1τμχ
- Breadboard Jumper 30τμχ
- SW-520D ball switch/switch tilt switch 2τμχ
- Plastic Box 1τμχ
Κωδικός: ARD1035-1 -
Arduino OEM
USB Nano V3.0 Micro-controller board για Arduino
0 out of 5(0)Το Iduino Nano είναι μια μικρή ολοκληρωμένη και breadboard-friendly πλακέτα βασισμένη στο ATmega328 (Arduino Nano 3.x) ή στο ATmega168 (Arduino Nano 2.x).
Έχει λίγο πολύ την ίδια λειτουργικότητα του Arduino Duemilanove, αλλά σε διαφορετικό πακέτο.
Του λέιπει μόνο το DC power jack, και δουλεύει με ένα Mini-B USB καλώδιο αντί για το συνηθισμένο καλώδιο.
Κωδικός: ST1027