arduino
arduino
Προβολή όλων των 17 αποτελεσμάτων
-
Arduino OEM
5 Line 4 Phase Stepper Motor Drive Board
Driver board for 4 phase 5 wire step motor, comes with high power ULN2003 chip to drive the motor.
Standard easy plug and unplug interface for convenient connection with stepper motor.
A, B, C, D four-phase LED indicate the working status of the motor.
Κωδικός: ME016 -
Arduino OEM
5 Line 4 Phase Stepper Motor Drive Module
1. With the ULN2003A motor driving chip
2. all pins of the chip have been led out to make connection easy
3. with pins of 5-12V power supply
4. with 4 signal indicator
5. with XH-5P socket directly connected with the 28BYJ-48 model stepper motor
6. PCB board size: 40.5 (mm) x21.3 (mm)Κωδικός: ME015 -
Arduino OEM
USBtinyISP Programmer
This USBTinyISP programmer is ideally suited for in circuit programming of AVR devices or for reflashing bootloaders onto Arduino based products.
It includes a 6 and 10 pin SPI interface and cables. The 6 pin interface is designed to connect directly to the 6 pin ICSP found on Arduino boards such as the Mega, Nano, etc. This board also works great with the Arduino development environment, AVR studio, and avrdude.Κωδικός: ME060 -
Arduino OEM
4×4 Matrix Keypad Tact Switch
The 4×4 matrix keypad usually is used as input in a project.
It has 16 keys in total, which means the same input values.
The keys of each row and column are connected through the pins outside – pin Y1-Y4 as labeled beside control the rows, when X1-X4, the columns.
Κωδικός: ME045 -
Arduino OEM
Arduino STEP MOTOR DRIVER
1) PCB board size: 23*17*9mm;
2) patch process, LED status display;
3) compact size, sophisticated technology;
4) instructions: use ULN2003 high power Darlington chip to drive stepper motor driver; B, C, A, D LEDs indicate the state of the working four-phase stepper motor; set with the standard interface of stepping motor which can be directly inserted in the use; with diameter 3mm screw hole to make assembly fixing convenient.
Interface Description:VCC and GND power input is range from 5 to 24V ;IN1-IN4 corresponding test program 51
microcontroller P0.0-P0.3Κωδικός: ME017 -
Arduino OEM
Bluetooth 4.0 HM-10 Master Slave Module
Bluetooth Protocol: Bluetooth Specification v4.0 BLE
USB Protocol: USB V2.0
Operating Frequency: 2.4GHz ISM band
Transmission Rate: Asynchronous 6kbps
Synchronous 6kbps
Security Feature: Authentication and encryption
Power Supply: +3.3VDC 50mAΚωδικός: AD099 -
Arduino OEM
USB Nano V3.0 Micro-controller board για Arduino
Το Iduino Nano είναι μια μικρή ολοκληρωμένη και breadboard-friendly πλακέτα βασισμένη στο ATmega328 (Arduino Nano 3.x) ή στο ATmega168 (Arduino Nano 2.x).
Έχει λίγο πολύ την ίδια λειτουργικότητα του Arduino Duemilanove, αλλά σε διαφορετικό πακέτο.
Του λέιπει μόνο το DC power jack, και δουλεύει με ένα Mini-B USB καλώδιο αντί για το συνηθισμένο καλώδιο.
Κωδικός: ST1027 -
Arduino OEM
Iduino
Το Iduino είναι ένα microcontroller board βασισμένο στο ATmega328.
Έχει 14 ψηφιακά input/output pins (από τα οποία 6 μπορούν να χρησιμοποιηθουν σαν PWM outputs), 6 αναλογικά inputs, έναν 16 MHz ceramic resonator, μία σύνδεση USB, ένα power jack, ένα ICSP header και ένα κουμπί reset.
Περιέχει όλα όσα χρειάζονται για να υποστηριχθεί ο microcontroller.
Απλά συνδέστε το σε έναν υπολογιστή με ένα καλώδιο USB ή ενεργοποιήστε το με έναν αντάπτορα AC-to-DC ή μία μπαταρία για να ξεκινήσετε.
Κωδικός: ST1025 -
-